Рубрика: Stamping Dies

Technical guidance for stamping die components, punches, inserts, materials and tooling maintenance.

Stamping Dies

Progressive Die Wear Parts: What Wears First and Which Spares to Keep in Stock

Plate with Stepped Slots, Grooves and Through Holes - SkyPu

Which progressive die parts wear first, the signs to watch for, how much to remove when regrinding, die spring deflection limits, and which spare punches, inserts, pilots and springs to keep in stock.

Инженерная команда SKYPU MOLD
Ноябрь 2, 2026

Stamping Dies

Punch and Die Clearance: How to Specify It on Your Drawing, with Values by Material

Square Die Plate with Counterbores and Wire-Cut Openings - SkyPu

Reference punch and die clearance values by material, how to convert them into punch and die sizes, and what to write on the drawing so the die is made right.

Инженерная команда SKYPU MOLD
Октябрь 30, 2026

Компоненты пресс-форм, Stamping Dies

Sinker EDM for Mold and Die Components: Ribs, Blind Pockets and Sharp Corners

Sinker EDM machine in the SkyPu workshop in Kunshan, China

How sinker EDM produces deep ribs, blind pockets and sharp internal corners in mold and die components, how electrodes are made and what to specify on the drawing.

Инженерная команда SKYPU MOLD
Октябрь 28, 2026

Обработка с ЧПУ, Компоненты пресс-форм, Stamping Dies

Profile Projector Inspection for Punches, Die Inserts and Wire EDM Profiles

How a profile projector is used to inspect punches, die inserts and wire EDM parts: contour illumination, X-Y stage measurement, overlay charts, angles, radii and pitch.

Инженерная команда SKYPU MOLD
Октябрь 26, 2026

Обработка с ЧПУ, Компоненты пресс-форм, Stamping Dies

Surface Grinding for Tooling Plates and Inserts: Flatness, Parallelism and What to Specify

Chevalier FSG-1632ADIV CNC surface grinder in the SkyPu workshop in Kunshan, China

What buyers of die plates, inserts and blocks should specify for surface grinding: flatness, parallelism, thickness, squareness, finish and inspection.

Инженерная команда SKYPU MOLD
Октябрь 22, 2026

Компоненты пресс-форм, Stamping Dies

Wire EDM for Punches and Die Inserts: What Buyers Should Specify

What to specify when punches, die inserts and mold components depend on wire EDM: machine type, skim cuts, recast layer, carbide, heat treatment, geometry limits and RFQ checklist.

Инженерная команда SKYPU MOLD
Октябрь 19, 2026

Stamping Dies

Инструментальная сталь и твердый сплав для изготовления деталей штамповочных матриц

Compare tool steel and carbide for stamping die components, including wear, toughness, repairability, inspection and RFQ decisions.

Инженерная команда SKYPU MOLD
30 сентября 2026 года

Stamping Dies

Replacement Punch and Die Components: What Buyers Should Include in an RFQ

Precision metal stamping die and tooling components

Learn what to specify when sourcing replacement punch and die components, including drawings, clearance, steel, hardness, coating, inspection, and delivery.